Turning Off Your Water Main
Turning Off Your Water Main
Blog Article
Were you looking for details around How to Turn Off the Water in an Emergency?
If you try to close the water off to your components by using an angle quit and that doesn't function you will need to close of the water main to make your repair service. There are also lots of various other reasons you may require to shut the water pipe like fixing frozen pipelines, fixing leaks, replacing components or faucets.
Lots of people are not mindful that they even have a water main shutoff right in their very own house as well as just call a plumber of never ever wind up doing the repair work till things get actually bad since they merely do not know that shutting the water main is actually easy.
The most typical areas a water main will certainly be situated in home is in your boiler room, cellar, or a removed panel in a section for your house.
As soon as you find the water main you will just transform the valve clockwise to shut all the water off in your house till you have actually finished the repair service. Some residences will certainly have a ball valve with a bar that you can draw as opposed to rely on shut the water off.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
I ran across that page about How to Locate & Turn Off Main Water Shut-Off Valves while doing a lookup on the web. Be sure to take the opportunity to distribute this blog post if you enjoyed it. We love reading our article about How to Turn off the Water for Plumbing Repairs.
Click Here To Read More Report this page